What exactly is the difference between a surge protector and a fuse? Can a fuse protect the electronic devices from lightning instead of surge protector?
11.06.2025 09:52

(There is no concept of polarity, in the loop because the current changes direction 100 to 120 times a second (power frequency).
[image of Common-mode choke]
There are two important concepts here.
Do most narcissists have good intentions as long as you are under their control?
This is where the MOV conducts again, and dissipated the energy.
The other is “what does a “fuse” do?”
(Dc diagram shown, AC is similar).
What type of crossdresser are you?
It’s been three xxx five werks, and there has been no response to my follow on query on his Commment to my answer.
2024–10–16 [ OO OLAOYE OYEBODE ]
Is the question then , "why buy a surge supressor, if the fuse alone protects the electronic circuits from a lightning bolt?".
I Tasted 7 Chocolate Ice Creams and One Was a Clear Winner - Eat This Not That
It seems Mohan does not understand the difference between a comment and an Answer.
This device then solves the entire problem.
2024–10–14 [Omar Gharbi Omar Gharbi ]
Phillies Place Bryce Harper On 10-Day IL Due To Wrist Inflammation - MLB Trade Rumors
At one ohm, the resistor has a maximum of 1 watt power.
One is “what exactly is in a ‘surge protector’ ? ”
The MOV will conduct when the voltage exceeds 50% of line voltage.
Israel launches several attacks on Beirut’s southern suburbs, south Lebanon - Al Jazeera
An AC voltage/ current source, and an ac inductive load.
He then asserts :
These devices are installed between the “hot” and “neutral” and protective ground.
Why do many women like tall men?
So, the voltage could go up to 500 volts, and the fuse will not open up.
For this case there are devices called Metal oxide varistors (MOV).
“ … to protect building, lightning arrestor, is provided above building and directly connected to earth.”
15 Retinol-Rich Foods To Stimulate Collagen - Vogue
These are simplified answers to the original question, and does not change anything I wrote above.
so, the loop of wire then, when put together with another loop reduces the ‘noise’ on a power line.
the problem then depends on "how fast does the fuse operate?".
What questions are asked in a JP Morgan Hirevue interview?
It also is a device that limits the change in current flow.
But… the neutral is now “floating” because of the 1 ohm resistance.
Can the fuse protect the electronic devices from lightning instead of a surge protector.
This is where this question deviates from being a 'generic' question, and becomes more specific.
If the nominal power is 4,000 watts then the current at 230volts is 16 amps.
so, what happens?
Fastest Payout Online Casino: Lucky Creek Best of Instant Withdrawal Casinos - ACCESS Newswire
Mohan forgets that a fuse is a one-time device, and needs to be replaced if it is tripped.
This is an electronic circuit designed to clamp voltages so that the Voltage Potential that appears at the outlet is never going to exceed the nominal value.
This is 'the assistant's answer'
nine
Would individual surge supressors have save this equipment? most likely, since the surge supressor would take the jolt instead of the electronic components.
What is lightning?
Upvotes:
He then describes the function of a fuse.
There are three different concepts here that are getting confused.
but I think this circuit , shows a few more pieces.
[old diagram got deleted by accident]
Fuses, on their own, then operate much slower than the MOV variable resistance, during the lightning strike.
At the secondary, it is 1000 times less.)turns ratio). If it gets hit with a 100,000 volt bolt of lightning then the voltage arrestors conduct and clamp the voltage down to line voltage, ( but a small amount leaks down the line). This is the problem.
But it can get overloaded, and no longer works.
Because the load is inductive, the current lags the voltage.(by a bit).
P = e* I, so since I is 16 amps, then the voltage dropped is 1/16 volt or 0.0650 volts.
what exactly is a ‘surge’ protector?
A circuit breaker is similar, but is resettable.
eight
A fuse is a non-resetable over current circuit protector.
OK, this is Mohan Rajaratnam’s definition of a Surge suppressor.
2024–10–10[John johnson John Johnson ]
He then describes Rainy Season and Lightning.
First Sentence:
2024–10–00 [ Ammar Mahdi ] Ammar Mahdi
This is the picture of an electronic coil of wire wound around a core of magnetic material.
Lightning arrestor is a spark-gap device, and can be installed anywhere. What is important, is that the wire is thick enough to withstand the lightning bolt and conduct the energy away from the building.
“ A fuse is a device which protects the (circuit) against overload and short circuit.”
2024–09–27 [ Mohan Rajaratnam Mohan Rajaratnam ] . Thinks you can get free electricity from nothing : Mohan Rajaratnam's answer to Is it possible to generate free electricity at home using a magnet or other low-cost methods? If so, how does it work?
This is a high voltage low current spike that comes down the line because of the power poles being struck, and the voltage suppressors activating on the primary side of the transformer.
So, it’s possible that these devices from Trip Lite have addition suppression devices, these ones seem to be sturdy.
This is a photo where a lightning bolt took out a home's complete mains distribution box, and a lot of electronic gear as well.
2024–10–11 [Victor Olarewsju Victor Olarewaju ]
Edit 2024–10.
So combined with a device called a MOV or Metal-oxide-resistor, then forms the 3rd part of a “surge suppressor “.
The bolt then partially travels down the line to your home.
The third is lightning and “how it gets conducted into a home.”
And this is the problem alone. Is the power supply in the equipmemt designed with a lightning strike in mind? Some yes, others, no.
When the current is 200% of the rated value , it will “go open” (the link metal melts) and protect the device.
In schematic diagrams this is the symbol for a fuse:
2024–10–11 [Bobby Sanchez Bobby Sanchez ].
but this device (an Inductor) … impedes the rapid changes in the current.
“ A surge suppressor is the one which is connected at the input supply so that when there is a sudden change voltage it bypasses thereby protecting the (circuit) and electronic components”
This one hit behind the barn.
One
Barnstars:
Now when you have a certain ac resistance, then a current flows in a loop.
a photo is worth a thousand words.
I post the exact comment here.
Here is a simplified AC power diagram.
But during the surge, the fuse will not blow if it is a longer duration and lower value )10 to 50%).
What does a fuse do?
Once the voltage goes over 0.0650 volts, then this fact can be used to amplify the difference, and turn the circuit breaker off , furthur down the line. Essentially that is what a RCD/GFCI does, it compares the incoming current, to the outgoing current, and if the difference between the two currents is over 5mA, then it trips the circuit breaker.
There is no harm in having the surge suppressor along with the fuse in the circuit. The fuse will not open up until the current melts the link. This will take time, and in the interim, that jolt will get transmitted into the power supplies.
At least they know the answer if they wanted it.